The Cartier replica Rotonde de Chronograph

We study the styling of the Cartier Rotonde de Cartier replica watches Chronograph and test its in-house movement in this review from the WatchTime archives. Original photos are by OK-Photography.
At first look, $9,050, the price of the Rotonde de Cartier Chronograph, seems to be a lot to pay for a steel chronograph. But it’s only a little higher than the cost of a Zenith El Primero or an IWC Portugieser chronograph. And while we’re comparing: the El Primero is a half century old already, and the ETA 7750 that runs the comparable Portugieser chronograph is almost that old and isn’t an in-house movement. Cartier unveiled its 1904-CH MC, the caliber inside the Rotonde de Cartier Chronograph, in 2013. Unlike the El Primero, it has a stop-seconds function. And although it doesn’t have a running seconds hand, its dial looks well balanced thanks to elapsed-time counters at 3 and 9 o’clock.


The 1904-CH MC is made so that the chronograph’s central elapsed-seconds hand can also be used as a running seconds hand. The two barrels maintain a constant level of drive torque independently of the winding status of their mainsprings, which ensures rate stability and precision. Our rate measurements show that the good rate continues when the chronograph is running. The results remain more or less identical after the cheap replica watches has been allowed to run for 24 hours without additional winding. If the Rotonde de Cartier replica Chronograph is worn regularly, it will usually have fully wound mainsprings. The rotor, which turns smoothly in a sturdy ceramic ball bearing, winds the movement in both its directions of rotation. Bidirectional winding is achieved using an alternator with an innovative pawl-click system, which accelerates the winding speed.


The zero-return function is blocked while the chronograph is running. Cartier achieved this by installing a linear heart lever inside the movement. The lever ensures the simultaneous return of all elapsed-time hands to their zero positions independently of the pressure exerted on the push-piece. The vertical coupling ensures that the chronograph starts and stops precisely. But despite the high technology, Cartier hasn’t ignored aesthetic finesse. In addition to Geneva waves and satin finishing, circular graining embellishes even the hidden sides of various components. The fine adjustment system for the balance is an eye-catcher, too: the C-shaped regulator with eccentric screw not only facilitates ultra-precise setting; it also underscores the brand’s identity.SPECS:


Manufacturer: cheap Cartier replica SA, Chemin des Alisiers 10, 2300, La Chaux-de-Fonds, Switzerland
Reference number: WSRO0002
Functions: Hours, minutes, central elapsed seconds, counters for 30 elapsed minutes and 12 elapsed hours, date display
Movement: In-house Caliber 1904-CH MC, automatic, 28,800 vph, Glucydur balance, Incabloc shock absorption, fine adjustment via eccentric screw in a C-shaped spring, 48-hour power reserve, diameter = 26.8 mm, height = 5.7 mm
Case: Stainless steel, sapphire crystal, sapphire window in caseback, water-resistant to 30 meters
Strap and clasp: Alligator strap with folding clasp that pivots on one side only
Rate results (deviations in seconds per 24 hours, fully wound/after 24 hours)
Dial up +7.6/+4.6
Dial down +7.8/+2.7
Crown up -2.0/+0.8
Crown down +5.3/+5.7
Crown left -1.7/0.0
Greatest deviation of rate 9.8/5.7
Average deviation +3.4/+2.8
Average amplitude:
Flat positions 316°/296°
Hanging positions 264°/253°
Dimensions: Diameter = 40 mm, height = 12.2 mm, weight = 82 grams
Variations: With rose-gold case ($23,700); with white-gold case ($25,400, limited edition of 300 pieces)
Price: $9,050

Leave a Reply

Your email address will not be published. Required fields are marked *